Installation Manual
14 Device management
Chapter 3
Device management
3.1 Product handling and storage
This device has been properly packed inside a cardboard box, however, care must be taken to avoid
accidental damage during handling. Cartons/boxes should be placed in such a way as to avoid knocks
and falls, and special care must be taken to protect the devices from extreme heat and/or cold.
3.2 Environmental conditions
Temperature limits:
-10° / +55°C for transport and storage
-5° / +40°C operating temperature
3.3 Unpacking the device
Take due care when unpacking the product, and dispose of all waste packaging in accordance with the
local method of disposal.
The cardboard box contains the SmartLoop control panel (cabinet in metal).
Note: All waste packaging must be disposed of in full respect of the local laws in force.
3.3.1 Inside the box
Figure 4 - Box contents
Inside the box you will find
1. Metal cabinet containing the motherboard
2. Installation Manual
3. Plastic bag containing: resistors, + diodes, 2032 lithium battery, keys, battery connection wires
To Next Page
Loading...
Need help?
General
