Installation Manual
50 Maintenance
Appendix A
Maintenance
The following operations must be carried out regularly.
1. Using a damp lint-free cloth, remove any dust that may have gathered on the control panel (do
not use any kind of cleaning product or solvent!).
2. Push the TEST button to check the proper operating capability of the LEDs and beeper.
3. Check the battery efficiency and change them if necessary.
4. Check the integrity of all wires and connections.
5. Ensure that there are no insects inside the control panel.
6. Carry out maintenance on the detectors (clean the outside and the detection chamber).
Note: Points 1 and 2 can be carried out by authorized persons, whereas all other points must be carried
out by qualified technicians.
To Next Page
Loading...
Need help?
General
