Installation Manual
3
Table of contents
Chapter 1 Overview ............................................................................ 5
1.1 Application and use 5
1.2 In order to validate the IMQ-SISTEMI DI SICUREZZA certification, and in
compliance with EN54-2 regulations, 7
1.3 About the SmartLoop fire alarm panel series 7
1.4 Description of the models 7
1.5 Features 8
Chapter 2 General information.............................................................. 9
2.1 Documentation supplied 9
2.2 Manual details 9
2.3 About the Software 9
2.4 Addressees 9
2.5 Operator authorization—access levels 9
2.6 Intellectual property rights 10
2.7 Disclaimer 10
2.8 Recommendations 10
2.9 Testing the system 10
2.10 Note to the installer 10
2.11 Technical support 10
2.12 Conventions 10
2.13 Manufacturer's name and address 11
2.14 Device identifier 12
2.15 Warranty 12
2.16 Safety laws 12
Chapter 3 Device management............................................................14
3.1 Product handling and storage 14
3.2 Environmental conditions 14
3.3 Unpacking the device 14
Chapter 4 Internal devices ..................................................................16
4.1 The motherboard 16
4.2 About attachment boards 17
4.3 The SmartLoop/2L board 18
4.4 The SmartLoop/NET board 19
4.5 The SmartLAN board 21
4.6 The SmartLoop/PSTN board 22
4.7 The SmartLoop/INOUT board 23
4.8 SmartLetUSee/LED module 23
4.9 The SmartLoop/PRN module (for “/P” models only) 24
4.10 The SmartLetUSee/LCD and SmartLetUSee/LED Repeater panels 26
Chapter 5 Technical specifications........................................................27
Chapter 6 Installation.........................................................................29
6.1 Choosing the mounting location 29
6.2 Installation flow, guidelines and testing 29
6.3 Connecting the SmartLoop/LED module 31
6.4 Connecting the SmartLoop/PRN printer module 32
Chapter 7 Connections .......................................................................33
7.1 Note to the Installer regarding wiring and connection compliancy 33
7.2 About the circuitry 33
7.3 Description of the motherboard terminals 34
7.4 Loop Connections 34
7.5 Loop terminals 35
7.6 Connecting devices to the Loop 35
7.7 NAC Outputs (Notification Application Circuit) 36
7.8 PL terminal (for Shutdown signaling) 37
To Next Page
Loading...
Need help?
General
