Mechanical Installation (T10 to T12 Models)
‑96‑
Figure 5‑9 Mounting the guide rail assembly to the cabinet
4. Remove the cover from the AC drive.
For details about how to remove the cover, see "Removing Cover". With the cover
removed, the auxiliary handle on the AC drive is exposed.
5. Align the casters of the AC drive with the guide rails and gently push the AC drive in‑
to the cabinet.
Use an auxiliary strap to prevent the AC drive from toppling when it is being pushed
in or pulled out. It is recommended that two persons cooperate to complete this
job.
To Next Page
Loading...
