Mechanical Installation (T10 to T12 Models)
‑95‑
Figure 5‑7 Installing the bottom mounting bracket
3. Make a guide rail assembly (model: MD500‑AZJ‑A3T10) and mount the guide rail as‑
sembly to the cabinet.
a. "
Figure 5–8
"
on page 95
shows how to make a guide rail assembly.
Figure 5‑8 Making a guide rail assembly
b. Align the two round holes on the front end of the guide rail assembly with the
screws of the mounting bracket, and lock them with two M6 nuts to mount the
guide rail assembly to the cabinet, as shown in "
Figure 5–9
"
on page 96
.
To Next Page
Loading...
