ASSIST PLUS – Operating instructions V02 Programming
20 INTEGRA Biosciences AG
5 Programming
5.1 Overview pipetting programs
ASSIST PLUS pipetting programs can be created in different ways:
• Preset programs: Change default pipetting parameters directly on the pipette to adapt
the program to your application.
• Custom programs: Create completely individual step-based programs directly on the
pipette or using the VIALINK PC software.
• VIALAB software: Create multi-step programs on a PC and transfer them to the pipette.
The VIALAB software offers a simple and intuitive graphical user interface, allowing you
to create programs with a few clicks, without extensive programming knowledge. Please
refer to www.integra-biosciences.com/download-vialab
for more information.
The table below shows the ASSIST PLUS program categories: VIALAB programs,
predefined programs (Serial Dilution, Repeat Dispense, Variable Dispense, Multi Aspirate,
Plate Copy, Reformat) and custom programs.
Program category Description
VIALAB Programs Contains the programs created with VIALAB software.
Serial Dilution Allows aspirating a transfer volume followed by a mix.
Repeat Dispense Allows dispensing multiple aliquots of the same volume without
refilling the tips after each dispense.
Variable Dispense Allows dispensing multiple aliquots of different volumes.
Multi Aspirate Allows aspirating multiple aliquots of the same or different
volumes.
Plate Copy Transfers samples between plates of the same well number to
create a copy of the source plate.
Reformat Allows to reformat 12, 24, 48, 96 and 384 well plates.
Custom Programs Allows to create multi-stepped user-defined pipetting programs.
To Next Page
Loading...
