Thermal/Mechanical Specifications and Design Guidelines 75
Mechanical Drawings
B Mechanical Drawings
Ta b l e B-1 lists the mechanical drawings included in this appendix.
Table B-1. Mechanical Drawing List
Drawing Description Figure Number
“Socket / Heatsink / ILM Keepout Zone Primary Side (Top)” Figure B-1
“Socket / Heatsink / ILM Keepout Zone Secondary Side (Bottom)” Figure B-2
“Socket / Processor / ILM Keepout Zone Primary Side (Top)” Figure B-3
“Socket / Processor / ILM Keepout Zone Secondary Side (Bottom)” Figure B-4
“Reference Design Heatsink Assembly” Figure B-5
“Reference Fastener (Sheet 1 of 4)” Figure B-6
“Reference Fastener (Sheet 2 of 4)” Figure B-7
“Reference Fastener (Sheet 3 of 4)” Figure B-8
“Reference Fastener (Sheet 4 of 4)” Figure B-9
“Reference Clip (Sheet 1 of 2)” Figure B-10
“Reference Clip (Sheet 2 of 2)” Figure B-11
“Thermocouple Attach Drawing” Figure B-12
To Next Page
Loading...
