BIOS Setup Program
113
4.6 Power Menu
To access this menu, select Power from the menu bar at the top of the screen.
Maintenance Main Advanced Security
Power
Boot Exit
The menu represented in Table 75 is for setting the power management features.
Table 75. Power Menu
Feature Options Description
Power Management • Disabled
• Enabled (default)
Enables or disables the BIOS power management
feature.
Inactivity Timer • Off
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes (default)
• 30 Minutes
• 60 Minutes
• 120 Minutes
Specifies the amount of time before the computer
enters standby mode.
Hard Drive • Disabled
• Enabled (default)
Enables power management for hard disks during
standby modes.
ACPI Suspend State
• S1 State (default)
• S3 State
Specifies the ACPI suspend state.
Video Repost
• Disabled (default)
• Enabled
Allows the video BIOS to be initialized coming out of
the S3 state. Some video controllers require this
option to be enabled. This feature is present only if
the ACPI suspend state is set to S3.
To Next Page
Loading...
Need help?
General
