Thermal Specifications and Design Considerations
102 Datasheet
NOTES:
1. The TDP specification should be used to design the processor thermal solution. The TDP is
not the maximum theoretical power the processor can generate.
2. Not 100% tested. These power specifications are determined by characterization of the
processor currents at higher temperatures and extrapolating the values for the
temperature indicated.
3. As measured by the activation of the on-die Intel Thermal Monitor. The Intel Thermal
Monitor’s automatic mode is used to indicate that the maximum T
J
has been reached.
4. The Intel Thermal Monitor automatic mode must be enabled for the processor to operate
within specifications.
5. Processor TDP requirements in Intel Dynamic Acceleration Technology mode are lesser
than TDP in HFM.
6. At Tj of 105
o
C
7. At Tj of 50
o
C
8. At Tj of 35
o
C
Table 21. Power Specifications for the Dual-Core Standard Voltage Processor
Symbol
Processor
Number
Core Frequency & Voltage
Thermal Design
Power
Unit Notes
TDP
T9900
T9800
T9600
T9550
T9400
3.06 GHz & V
CCHFM
2.93 GHz & V
CCHFM
2.80 GHz & V
CCHFM
2.66 GHz & V
CCHFM
2.53 GHz & V
CCHFM
1.6 GHz & V
CCLFM
0.8 GHz & V
CCSLFM
35
35
35
35
35
22
12
W
1, 4,
5, 6
Symbol Parameter Min Typ Max Unit Notes
P
AH,
P
SGNT
Auto Halt, Stop Grant Power
at V
CCHFM
at V
CCSLFM
——13.9
5.0
W2, 5, 7
P
SLP
Sleep Power
at V
CCHFM
at V
CCSLFM
——13.1
4.8
W2, 5, 7
P
DSLP
Deep Sleep Power
at V
CCHFM
at V
CCSLFM
——5.5
2.2
W2, 5, 8
P
DPRSLP
Deeper Sleep Power — — 1.7 W 2, 8
P
DC4
Intel® Enhanced Deeper Sleep state Power — — 1.3 W 2, 8
P
C6
Intel® Deep Power Down Power — — 0.3 W 2, 8
T
J
Junction Temperature 0 — 105 °C3, 4
To Next Page
Need help?
General
