Intel P8700 - Core 2 Duo Processor - Active VCC and ICC Loadline for Low-Voltage, Ultra-Low-Voltage and Power Optimized Performance Processor

Electrical Specifications
46 Datasheet
NOTES:
1. Applies to Low-Voltage, Ultra-Low-Voltage and Power Optimised Performance processors in
22 mmx22 mm package.
2. Active mode tolerance depends on VID value
Figure 7. Active VCC and ICC Loadline for Low-Voltage, Ultra-Low-Voltage and Power
Optimized Performance Processor
I
CC-CORE
max
{HFM|LFM}
V
CC-CORE
[V]
V
CC-CORE
nom {HFM|LFM}
+/-V
CC-CORE
Tolerance
= VR St. Pt. Error 1
/
V
CC-CORE, DC
min {HFM|LFM}
V
CC-CORE, DC
max {HFM|LFM}
V
CC-CORE
max {HFM|LFM}
V
CC-CORE
min {HFM|LFM}
10mV= RIPPLE
I
CC-CORE
[A]
0
Slope = -4.0 mV/A at package
VccSense, VssSense pins.
Differential Remote Sense required.
Note 1
/ V
CC-CORE
Set Point Error Tolerance is per below:
Tolerance V
CC-CORE
VID Voltage Range
--------------- --------------------------------------------------------
+/-1.5% V
CC-CORE
> 0.7500V
+/-11.5mV 0.5000V </= V
CC-CORE
</= 0.7500V
+/-25mV 0.3000V </= V
CC-CORE
< 0.5000V