Intel S3420GPLC - Server Board Motherboard

Intel® Server Board S3420GP TPS BIOS User Interface
Revision 2.4
Intel order number E65697-010
75
 IPMI command (set System Boot options command)
 Int15 AX=DA209
 Choosing Load User Defaults from the Exit page of the BIOS Setup loads user set
defaults instead of the BIOS factory defaults.
The recommended steps to load the BIOS defaults are:
1. Power down the system (Do not remove AC power).
2. Move the Clear CMOS jumper from pins 1-2 to pins 2-3.
3. Move the Clear CMOS jumper from pins 2-3 to pins 1-2.
4. Power up the system.