Intellian i3 - Operating the ACU - Status Monitoring; Monitoring the Current Status of the Antenna

Operation Using the ACU 27
Monitoring the current status of the antenna
While POWER ON to Intellian i3/i4, ACU displays the status of the antenna.
The various ACU displays may be shown according to the current status of
the antenna.
ANTENNA IS UNWRAPING
B:DTV119 SETUP
SEARCH A: DTV101
B:DTV119 SETUP
TRACKING A:DTV101
B:DTV119 SETUP
AZ : ###.# EL : ##.#
SIGNAL:###● [VL]
TRACKING A:DTV101
B:DTV119 SETUP
###.##E ##.##N
SETUP
1. The antenna is searching for Satellite A.
2. The antenna is tracking Satellite A.
3. The antenna is unwrapping the cable.
4. The antenna is again tracking satellite A.
Press center soft key to display position detail.
5. Antenna position detail and signal strength are
displayed.
6. Press center soft key to display current GPS
information. Press SETUP to return to main setup
mode.