Intellian i3 Install And User Manual

Operation Using PC Controller Program 55
Command Button
y Edit Satellite Information – To modify the satellite information.
y Register for Sat A – To register a satellite to satellite A.
y Register for Sat B – To register a satellite to satellite B.
y Not Use – Do not use DiSEqC.
y Change Band – To use DiSEqC to change band.
y Change Satellite – To use DiSEqC to change the satellite.
y Singe Band – Antenna in use of Single LNB.
y Universal Band – Antenna in use of universal LNB.
y Set Local Frequency – To select local frequency of LNB.
Main Menu- Using Advanced Triple-sat Mode
Local f requency
Signal strength
Antenna status monitoring
Select & Monitor target satellite
Satellite pair
DTV101 – SAT A without DiSEqC
DTV119 – SAT B without DiSEqC
DTV110# – SAT C with DiSEqC
Contro ller Menu
Load Default
1)
Update Default
2)
Antenna Status Monitoring
y Search – Antenna is searching for the selected satellite.
y Tracking – Antenna is tracking the selected satellite.
y Initialize – Antenna or the ACU is initializing.
y Unwrap – Antenna is unwrapping the wire.
y Setup – Antenna is in setup mode.
y Comm. – Antenna is possible communication.

Intellian i3 Specifications

General

Brand	Intellian
Model	i3
Category	Antenna
Language	English