Intellian i3 Install And User Manual

Operation Using PC Controller Program 53
Main Menu – Using Default Dual-sat Mode
Local f requency
Signal strength
Antenna status monitoring
Select & Monitor target satellite
Satellite pair
DTV101 – SAT A without DiSEqC
DTV119 – SAT B without DiSEqC
Contro ller Menu
Load Default
1)
Update Default
2)
Antenna Status Monitoring
y Search – Antenna is searching for the selected satellite.
y Tracking – Antenna is tracking the selected satellite.
y Initialize – Antenna or the ACU is initializing.
y Unwrap – Antenna is unwrapping the wire.
y Setup – Antenna is in setup mode.
y Comm. – Antenna is possible communication.
Definition of program Command Buttons
y Restart – To exit setup mode and restart antenna again.
y Setup – To enter the setup mode.
y Get Antenna Information – To indicate the information on display
after receiving it input to the antenna.
y Factory Setting – To initialize all antenna information to the default
ex-factory status.
y Load Default – To display the up-to-date information from the PC
program.
y Update Default – To update the antenna information by the
up-to-date information from the PC program.

Intellian i3 Specifications

General

Brand	Intellian
Model	i3
Category	Antenna
Language	English