20 i3/i4 Satellite Antenna System – Install and User Manual
Connecting the system to a GPS
For improved satellite tracking, you can connect your satellite TV system directly
to your boat’s NMEA 0183 GPS system. To do this you will need two cables
which are suitable for connecting to your GPS system and the green 2-way ACU
GPS connector supplied with your Intellian i3/i4 Satellite TV System.
To connect the system to a GPS
1. Strip back the insulation of each cable and connect a cable to each
terminal of the 2-way connector.
2. Tighten the locking screws.
3. Connect the cable from the +ve terminal of the ACU GPS connector
to the NMEA OUT wire of the boat’s GPS system.
4. Connect the cable from the –ve terminal of the ACU GPS connector
to the ground wire of the boat’s GPS system.
5. Refit the ACU GPS connector to the rear of the ACU.
Ground (-)NMEA out (+)
To Next Page
Loading...
