66 i3/i4 Satellite Antenna System – Install and User Manual
Preparation for Transportation
This is to describe how to fix the antenna internally for transportation, and the
following procedures to fix antenna shall be strictly observed to protect it from
being damaged during transportation.
1. Refer to the drawing given below.
2. Rotate antenna left and right slowly till the limit switch is pressed.
Don’t rotate it quickly, or you may damage the antenna limit system.
3. Turn the antenna by 360° to the reverse direction.
5. Insert the sponge in both sides of the dish to fix the pedestal in position
with the bottom Radome.
6. Cover upper part of Radome being careful for it’s not touching the reflector,
and then assemble upper part of Radome.
7. Pack Intellian i3/i4 into the original package box.
Housing
Bottom of the
Radome
Foam
Shipping
Restraint
Hosing
Bottom of the
Radome
Intellian i4 Intellian i3
WARNINGWARNING
To Next Page
Loading...
