Intellian i3 - Operating the ACU - Remote Control Setup; Setting Remote Control

Operation Using the ACU 43
Setting Antenna Go Position
The antenna can be controlled manually by using ACU.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
GOTO POSITION ?
YES NO
x9
ANT GO POSITION?
PREV YES NEXT
GO TO AZ : ###.#
- INPUT +
GO TO EL : ###.#
- INPUT +
AZ:###.# EL:###.#
EXIT
1. Press YES to enter setup mode.
2. Press NEXT nine times to enter the antenna go
position mode.
3. Press YES to go position.
4. Input position value for azimuth (AZ) axis.
+ increases the value. – decreases the value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press BACK to move to previous digit.
Press ENTER to move to next screen.
6. Press YES to move the antenna to input position.
Press NO to retu rn to the Anten n a Go Position
mode.
7. Press EXIT to return to main setu p mode.
5. Input position value for elevation (EL) axis.
+ increases the value. – decreases the value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press BACK to move to previous digit.
Press ENTER to move to next screen.