Intellian i3 - Operating the ACU - Manual Positioning; Setting Antenna Go Position

Operation Using the ACU 45
Setting Remote Control
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
x8
SET REMOCON ?
PREV YES NEXT
FUNC : CHANGE SAT
NEXT SELECT EXIT
PRESS A REMOTE KEY
BACK EXIT
FUNC : SLEEP MODE
NEXT SELECT EXIT
1. Press YES to enter setup mode.
2. Press NEXT eight times to enter remote control
setting mode .
3. Press YES to set remote control.
4. Select the Function
1)
NEXT – Shows next function.
6. Point remote control to ACU .
Press any key on remote control for selected
function and press same key again for
confirmation.
Press BACK to move to previous screen.
Press EXIT to return to main setup mode.
5. SELECT/ENTER –Registers a key on remote
control .