Operation Using PC Controller Program 57
Sat B” and Z“Register for Sat C” may be registered. Pushing X or
Y or Z button after selecting the satellite in the list box makes it
possible to register A or B or C.
y Local Frequency
In case that DiSEqC is selected to “Change Band”, be sure to
push the “Universal LNB” button. In case that the DiSEqC is
selected to “Not Use” or “Change Satellite”, be sure to push
“Single Band” button and key in into the Local Frequency, and
then push “ Set Local Frequency” button.
Command Button
y Edit Satellite Information – To modify the satellite information.
y Triple Satellite Mode – To use Triple Satellite.
y Register for Sat A – To register a satellite to satellite A.
y Register for Sat B – To register a satellite to satellite B.
y Register for Sat C – To register a satellite to satellite C.
y Not Use – Do not use DiSEqC.
y Change Band – To use DiSEqC to change band.
y Change Satellite – To use DiSEqC to change the satellite.
y Singe Band – Antenna in use of Single LNB.
y Universal Band – Antenna in use of universal LNB.
y Set Local Frequency – To select local frequency of LNB.
Load and Update Default Command Button
1) Load Default: Click “load default” button to select *.rif file according to
your region.
To Next Page
Loading...
Need help?
General
