D-0172335-A – 2020/10
Orion Rotary Chair Installation Instructions Page 1
1 Introduction
1.1 About this manual
This manual detail the installation procedure for the Orion Chair (Auto-transverse / Comprehensive), used
with the VisualEyes™ 515 and VisualEyes™ 525 Software version 3.0 and later. Both Auto-transverse and
Comprehensive will be hereafter denoted by ‘Orion Chair’ if it is not specified.
Interacoustics A/S
Audiometer Allé 1
5500 Middelfart
Denmark
Tel.: +45 6371 3555
Fax: +45 6371 3522
E-mail: info@interacoustics.com
Web: www.interacoustics.com
1.2 Environmental Conditions
• Recommended for indoor use only
• Relative Humidity (transport): 30 to 80% (non-condensing), keep dry
• Temperature Storage: 32° to 122° F (0° to 50° C)
• Operating Temperature: 59° to 95° F (15° to 35° C)
• Power Supply: 115VAC, 230VAC step down to 115VAC through isolation
transformer
Note: Please refer user manual of VisualEyes™ 515 and VisualEyes™ 525 Software version 3.0 and later
for EMC related information.
1.3 Marking
The following marking can be found on the instrument:
An applied part that includes a patient connection that is intended to deliver
electrical energy or an electrophysiological signal to or from the patient shall
be a Type BF part. An EOG amplifier is considered a Type BF part.
An applied part that includes a patient connection which can be
disconnected from the patient immediately is a Type B part. The Aqua
Stim™ caloric irrigator is a Type B part.
Follow instructions for use
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
Failing to do so may endanger the environment.
0123
The CE-mark indicates that the manufacturer meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC for the quality system.
To Next Page
Loading...
