Interacoustics VN415 - Page 8

VN415 / VO425 Instructions for Use - English
Date: 2010-12-20 Page 4
To review a recorded test, activate the button in the toolbar. The screen will now change into
playback mode and the cameras will be disconnected.
 Adding notes
Notes about the Session or the individual test can be added by clicking on the button.
 Creating a Letter
Select the ‘Letter Wizard. . .’ from the ‘Session’ menu. Select the appropriate information from the
presented fields. New selectable information can be added with the button. This can then be
saved with button or deleted with button.
 Printing
Select the “Print Session” button to receive printouts from the whole session. Select the “Print
Test” button to receive printouts for a selected test.
 Save and Exit
Select to save data and to exit session. Alternately select if you want to exit without
saving data.
………………………………………………………………………………………………………………….............................................
Various additional tools:
Lock Chair
Click the ‘Lock Chair’ button to lock the Interacoustics rotary chair in any horizontal position.
This function is relevant for clinics using the Interacoustics rotary chair as an examination table for
caloric irrigations and positional testing.
To release the chair, click the ‘Lock Chair’ button again.
Tree View
Click , to access the tree view. This will display the Session and test order information on the left
side of the screen.
Session Template Designer
To view and make changes to a Session Template choose ‘Session Template Designer’ under the
Session menu. In this dialogue the properties of a Session can be changed. A new Session
Template can be configured by pressing the button. Changes to the selected template can
be saved with the button. The number of tests performed and their order can be changed in
the tests to be performed list . Tests can be inserted by using the button.
Tests can be deleted using the button. The order of tests performed can be changed by
using the and buttons. The settings of a selected test can be changed in by using the
button.