Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 65
1.6 Default panel
The Default panel menu lets you clear all settings and repeat the initial
installation.
Caution: This command deletes all programming settings, including users.
See “Initial start-up” on page 43 for more details.
Caution: After defaulting panel, restart the system by powering it down and up.
1.7 Can Inst.time
7 Cancel in.time
Disable?
The Cancel installer in-time menu lets you disallow the Installer in function before
the Installer in-time expires (see “8.1.3.6 Installer in-time” on page 141).
Note: This option is only valid if the installer requires a user authorization. See
“8.2.1 User code required” on page 143.
Use this function after the panel programming is complete. To cancel the installer
in-time, go to this menu and press Enter. Next, log out. After this, the installer log
in requires another user confirmation.
See also “8.2.1 User code required” on page 143.
To Next Page
Loading...
Need help?
General
