Chapter 3 — Configuring the Computer
64 CN3 Series Mobile Computer User’s Manual
Use the following tables to understand the ISpyWiFi
information.
Use the WiFi Scan tab to scan your network and bring back
information about any access points with which you can
communicate.
To use the WiFi Scan tab
1 Tap the WiFi Scan tab.
2 Tap the Scan button.
3 Tap any of the columns to sort in ascending or descending
order.
Understanding the ISpyWiFi Tab
Setting Description
BCMCFI A WLAN adapter and its associated driver version.
MAC The client radio MAC address.
IP (DHCP) The IP address of the client radio, if using DHCP.
IP (static) The IP address of the client radio, if using a static IP
address.
Status Shows whether the radio is associated with the access
point.
Channel The channel on which the radio is communicating
with the access point.
ESSID The text SSID for your network.
BSSID The MAC address of the access point that the client
radio is communicating with.
Association Shows the type of association: Open, WPA, WPA-
PSK, WPA2, or Network EAP
Encrypt Shows potential encryption for the association.
Power CAM (Constantly Awake Mode) or FAST PSP
(Power Save Poll)
Antenna Diversity (multiple antennas, Primary (one antenna)
TX Power Transmit power level in milliwatts (mW).
RSSI The Received Signal Strength Indicator. The closer to
zero, the better for this indicator.
Link The data rate at which the radios are communicating.
To Next Page
Loading...
