Intermec CN3 Series

Chapter 3 — Configuring the Computer
48 CN3 Series Mobile Computer User’s Manual
Configuring the Computer Parameters
You can configure many parameters on the computer, such as the
bar code symbologies it decodes or the network settings. These
characteristics are controlled by configuration parameters. The
values you set for these configuration parameters determine how
the computer operates.
Configuring the Computer With Intermec Settings
Use Intermec Settings to configure the computer and view system
information. You can access Intermec Settings while running any
application.
To open Intermec Settings
•Tap Start > Settings > the System tab > Intermec Settings.
For detailed information on most of the commands available in
Intermec Settings, see the Intermec Computer Command Reference
Manual (P/N 073529) on the Intermec web site.
Navigating in Intermec Settings
To Do This Function Do This
Select a command. Tap the command or press or .
Expand a command. Tap the command or press or .
Select text in a text box. Tap in the text box and drag the stylus over
the text.
Save your settings. Tap File > Save Settings or tap .