Intermec CN3 Series

Chapter 1 — Using the Computer
CN3 Series Mobile Computer User’s Manual 13
Configuring the Backlight Settings
By default, the CN3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight
and display. Press a key or tap the screen to resume activity.
It is possible to override the backlight settings by changing the
power management settings. For more information on
configuring power management, see the next section, “Managing
Power on the CN3.”
To configure the backlight
1 Tap Start > Settings > the System tab > the Backlight icon >
the Battery Power tab.
2 With Turn off backlight if device is not used for checked,
select the timeout value (10 seconds, 30 seconds, or 1 to 5
minutes).
You can also use Intermec Settings to configure the backlight
settings.