Intermec CN3 Series

Chapter 1 — Using the Computer
CN3 Series Mobile Computer User’s Manual 11
Capitalizing Characters
To capitalize a single character on QWERTY keypads, press the
shift key, and then the character. To type all alphanumeric
characters as uppercase letters, you can enable the Caps Lock
feature on the CN3 keypad.
To enable Caps Lock
• On the QWERTY keypad, press B, then the Shift key. Press
the same key sequence to disable the Caps Lock.
• On the CN3 numeric keypad, press C 1.
• On the CN3e keypads, press C C 1.
The Caps Lock LED lights up green to show that the CN3 is in
the Caps Lock mode.
To exit Caps Lock
• On the CN3 keypads, press the color modifier key again.
• On the CN3e keypads, press 1.
Using the Color-Coded Keys
You Want to: Press: Example
Use an orange
character or function
printed above a key.
B key (LED illuminates) and
then the key with the character or
function printed above it (LED
turns off).
On the CN3 Qwerty keypad, press
B and then Q to type the @
character.
Use a green character
or function printed
above a key.
C key (LED illuminates) and
then the key with the character or
function printed above it (LED
turns off).
On the CN3 numeric keypad, press
C and then 2 to type a lowercase
a.
Lock the orange or
green key to stay on.
B or C twice. On the CN3e numeric keypad,
press
C twice and the green LED
illuminates and stays on.
Unlock a green or
orange key.
B or C once. Press the B or C once to unlock
the key and turn off the LED.