Chapter 3 — Configuring the Computer
68 CN3 Series Mobile Computer User’s Manual
3 Tap Menu > Phone Settings to configure the phone. For
help, see the next procedure, “Activating the CDMA Phone.”
4 Tap Done to close the Wireless Manager.
Activating the CDMA Phone
The CDMA WAN radio module is installed at the factory. To
activate your CDMA CN3 device, you need to contact the carrier
you have chosen and set up accounts for each device. Use the
following table to view the carriers that Intermec currently
supports. If your carrier is not listed in the table, please contact
Intermec product support to see if it is now supported.
The carrier will require the Electronic Serial Number (ESN) to
start the activation process. You can find the ESN:
• on a label located in the upper right corner of the battery
compartment.
• on the outside of the CN3 shipping box.
Currently Supported Carriers
Country Carriers
United States Alltel, Sprint, Verizon
Canada Bell Mobility, Telus
New Zealand Telecom New Zealand
To Next Page
Loading...
