Intermec CN3 Series

Chapter 1 — Using the Computer
CN3 Series Mobile Computer User’s Manual 7
Checking the Battery Status
The Battery Status LED above your CN3 display, as shown in the
following illustration, indicates the status of your battery. See the
following table to understand the meanings of the lights emitted
from the LED.
Battery Conservation Tips
When You Want To: Do This to Save Battery Power:
Operate the CN3 and the
Low Battery status icon
appears or the Battery light
comes on.
Press the power button to turn off the
CN3. Remove the battery and insert
another fully charged battery within five
minutes or you may lose data. Or, you
can connect the CN3 to an external
power source.
Stop using the CN3 for five
minutes or longer.
Make sure the low battery icon is not on
the screen and that the Battery light is not
turned on. Press the power button to turn
off the CN3.
Store the CN3 for more
than a day.
If you are storing the CN3 for a few days,
like over the weekend, install the charged
battery or attach the CN3 to a power
source.
If you are storing the CN3 for longer,
remove and charge the battery, then store
both the battery and the CN3 in a cool
location.
If the battery in storage is not used in
several months, you should recharge the
battery to keep it at its performance peak.
Store the battery outside
the CN3.
Store the batteries in a charger.
Battery status LED