Intermec CN3 Series

Chapter 4 — Developing and Installing Applications
106 CN3 Series Mobile Computer User’s Manual
•FTP server
• Wavelink Avalanche
The following sections explain how to use each one of these
processes to install your application on the computer.
Installing Applications Using SmartSystems Console
You can use the SmartSystems console to drag-and-drop
Intermec applications onto your mobile computers. The
computer ships with the SmartSystems client, which means it is
SmartSystems-enabled. The console is part of SmartSystems
Foundation, which you can download from www.intermec.com/
SmartSystems. For help using the console, see the online help.
To use SmartSystems console to install an application
1 Download your application file from the Intermec web site
and unzip it on your desktop PC.
2 Double-click the application file to install it. The application
file should appear in the Software Vault.
3 From the SmartSystems console in the Software Vault, drag-
and-drop the application onto each mobile computer in your
network.
Installing Applications Using Microsoft ActiveSync
You can use Microsoft ActiveSync to establish a connection
between your PC and the computer. ActiveSync transfers files,
synchronizes files, performs remote debugging, and other device
management activities. For more information on installing and
using ActiveSync, see
“Using Microsoft ActiveSync” on page 43.
You can have a serial or USB ActiveSync connection to the
mobile computer. When you only have a few computers to
update, you can copy files using Windows Explorer on a PC.
This procedure assumes that Microsoft ActiveSync is installed on
your PC and is up and running.
To install an application on the computer using ActiveSync
1 Connect the CN3 to a PC using a USB cable. You may have
to disconnect and then connect the cable to “wake” the
connection.