Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 57
2 Select Start > Settings > the Systems tab > Wireless
Printing. The Wireless Printing wizard appears.
3 Tap Set Different Printer. The Devices list appears with the
list of previously discovered printers.
4 Select the printer you want and tap OK.
5 Tap Print Test Page. The printer prints out the test page.
Connecting to a Bluetooth Audio Device
Use the Bluetooth Audio applet to discover, activate, and connect
to Bluetooth audio devices such as a Bluetooth headset. You can
control the audio volume and the amplification for the
microphone for the connected Bluetooth audio device (if the
connected device has these capabilities).
To connect to a Bluetooth headset
1 Select Start > Settings > Control Panel > Bluetooth Audio.
2 Tap Search for Devices. The CN3 searches for audio devices.
3 When searching for a device, select Yes when you are
prompted to add a device to your list.
4 Enter the passcode provided by your Bluetooth audio device
and then tap Next.
The passcode is provided by the manufacturer of your
Bluetooth audio device. You can usually find your passcode in
the user’s manual that comes with your audio device.
5 Select the services tied to the Bluetooth audio device you are
connecting to and then tap Finish.
Once the pairing is successfully completed, the Bluetooth audio
device appears in the list of devices that are found. To open a
pop-up menu for setting the device as the default, making a
connection, refreshing the connection, or deleting a device from
the list, double-tap a device in the list.
You can only select one Bluetooth audio device as the default
device. You must set a device to default before you can connect to
that device.
To Next Page
Loading...
