Chapter 1 — Using the Computer
28 CN3 Series Mobile Computer User’s Manual
And, as a Microsoft software component, the GPSID also
provides these benefits:
• Allows multiple applications to simultaneously access the
GPS data stream.
• Provides access to GPS data without requiring applications to
recognize and parse NMEA syntax.
Using the GPSID Installed on the CN3
To use the GPSID installed on your CN3, you need to configure
the GPSID settings.
To configure your GPSID settings
1 Tap Start > Settings > the System tab.
2 Tap GPS. The GPS Settings screen appears.
3 On the Programs tab, select the COM port that you want
your programs to use to get GPS data from your CN3.
4 Tap the Hardware tab, and select these settings.
GPS hardware port: COM3
Baud rate: 57600
Note: COM1 and COM3 are reserved.
To Next Page
Loading...
