Chapter 1 — Using the Computer
8 CN3 Series Mobile Computer User’s Manual
You can also check the battery status by using the Power
application.
To check the battery status
•Tap Start > Settings > the Systems tab > Power > the Battery
tab.
Understanding the Battery Status LED
Battery Status Description
Steady green The battery is more than 95% charged and
CN3 is on a charger.
Blinking red The battery is low. CN3 goes into Suspend
mode. Charge or replace the battery.
Steady red and the
CN3 is attached to
external power.
The battery is charging.
Steady red and the
CN3 is not attached to
external power.
The software is not working properly.
Steady amber The battery is missing or is unable to charge
because the temperature is outside of the
charging range.
Off The CN3 is not on external power and the
battery is operating normally.
To Next Page
Loading...
