Intermec CN3 Series

Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 69
The activation process is slightly different for each CDMA
carrier. Your carrier sales contact and an Interme representative
can guide you through the process.
After you supply the ESN to your carrier, they will respond with
values that you must enter using the Windows Mobile Activation
Wizard (if required). Some of the supported carriers do not
require you to enter any values. The following table shows the
carriers, the correct activation method to use, and the values that
you need to activate your phone.
Values Required for CDMA Phone Activation
Carrier Activation Method Activation Values You Need
Alltel Dial *22899 None - all parameters are automatically transferred
wirelessl.y
The Activation Wizard is disabled for Alltel.
Bell Mobility Activation Wizard • Service Programming Code (SPC), also called
the activation code
• Mobile Directory Number (MDN)
• Mobile Station Identification Number (MSIN)
• System ID (SID)
• Network ID (NID)
• Mobile Country Code (MCC)
• Mobile Network Code (MNC)
•Username
•Password
Sprint Activation Wizard • Master Subsidy Lock (MSL), also called the
activation code
•MDN
• Mobile Station Identifier (MSID)
Tel e c o m New
Zealand
Activation Wizard •SPC
•SID
•NID
Telus Dial *22803 None - all parameters are automatically transferred
wirelessly.
Verizon Dial *22899 None - all parameters are automatically transferred
wirelessly.
You can also use the Activation Wizard with
Verizon.