Intermec EasyCoder 501 - Easycoder 501 S, Test Mode Diagram

193Intermec EasyCoder 501 – Service Manual Ed. 7
Chapter 25 Test Mode
25.3 EasyCoder 501 S,
Test Mode Diagram
<PRINT> = PRINT
Lift head = EXIT
PRINT TEST LABEL
Lower head!
Printhead lowered
To exit,
lift head
and press
618 ohms / 8 dots
CODE39 CODE39
1234567890128
UART1 BAUDRATE 9600 PARITY NONE CHAR LENGTH 7 STOPBITS 2 RTS/CTS DISABLE ENQ/ACK DISABLE XON/XOFF DATA FROM HOST ENABLE DATA TO HOST ENABLE NEW LINE CR/LF PRINT CONFIG CONTRAST 5 LSS ADJ 80 STARTADJ 0 STOPADJ 0 XSTART 0 WIDTH 832 LENGTH 1200 MEDIA TYPE LABEL (w GAPS) HEAD RESIST 518 PAPER TYPE UBI HP 20 PERFORMANCE NORMAL MEMORY ALLOC IMAGE BUFF SIZE 48 KBYTE REC BUFF UART1 300 BYTE TRANS BUFF UART1 300 BYTE
CODE39
CODE39
Print
Print
Print
Print
Print
Print
Print