Need help?Do you have a question about the Intermec EasyCoder PC4 and is the answer not in the manual?
General| Resolution | 203 dpi |
|---|---|
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Print Method | Direct Thermal |
| Max Print Width | 4.09 inches (104 mm) |
| Max Print Speed | 4 inches per second |
| Max Print Length | 39 inches |
| Media Type | Roll-fed, die-cut, continuous, fanfold, tags, tickets |
| Media Width | 1.0 - 4.65 inches |
| Media Thickness | 0.06 mm (0.00236 in) to 0.18 mm (0.00708 in) |
| Interface | RS-232 |
| Memory | 4 MB Flash, 8 MB SDRAM |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10 to 90% non-condensing |
Provides an overview of the EasyCoder PC4 printer's features, capabilities, and connectivity options.
Provides essential safety warnings and precautions for operating the printer.
Explains how to locate the printer's machine label and identify its model and serial number.
Instructions for safely opening the printer box and checking for all included parts and accessories.
Details how to connect the printer to a power source, including voltage requirements and precautions.
Step-by-step guide for installing or removing the optional memory cartridge, ensuring safety precautions are followed.
Explains how to connect the printer to a computer via parallel, serial RS-232, or USB interfaces.
Guides users through installing the necessary printer drivers and software for PC connectivity.
Describes the printer's physical controls like the On/Off switch, Feed key, and indicator lamp.
Provides detailed instructions for loading media in Tear-Off, Peel-Off, and Cut-Off modes.
Instructions for loading and removing thermal transfer ribbons, including saving partially used ones.
Covers adjusting the label gap sensor and using the printer's test mode for diagnostics and setup.
Steps for cleaning the printer's exterior surfaces to maintain appearance and prevent damage.
Crucial procedure for cleaning the printhead to ensure optimal print quality and longevity.
Addresses common printer issues, providing solutions for operational problems and error conditions.
Details dimensions, weight, power requirements, interfaces, and environmental operating conditions.
Covers printable area, media types, ribbon specifications, printing speed, sensors, and fonts.
Lists supported bar code types and details about the printer's flash and DRAM memory.
Describes the keyboard, display, and available accessories and options for the printer.
Details direct thermal media, thermal transfer media (papers, plastics, polyesters), and transfer ribbons.
Specifies media roll sizes, label dimensions, tag/strip formats with slots or black marks, and continuous stock.
Describes the 36-pin Centronics connector and handshake signals for the parallel port.
Details the DB-9 serial connector and pin assignments for RS-232 communication.
Covers the USB interface, including cable connections and compatibility.
Outlines the necessary software, files, hardware, and memory cartridge for firmware upgrades.
Provides step-by-step guidance for upgrading firmware using a PC or a memory cartridge.
To Next Page