Intermec EasyCoder PD4 User Manual

Intermec EasyCoder PD4—User’s Guide 3
Chapter 1—Introduction
Safety Warnings
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side door is open, so ensure that
the door is closed before you operate the printer.
• Do not open the front/left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the power is
on.
• Place the printer on an even surface which can support its weight of
approximately 13 kg (28.7 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to clean
the premises in an industrial environment, remove the printer or pro
-
tect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a clean
-
ing card.
Product Identification
e machine label is attached to the printer’s rear plate and contains
information on type, model, and serial number as well as AC voltage. It
also contains various signs of approval.

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English