Intermec EasyCoder PD4 User Manual

64 Intermec EasyCoder PD4—User’s Guide
Chapter 9—Adjustments
Ribbon Tension Adjustment
If ribbon wrinkling occurs during printing, push the knob at the end of
the ribbon supply hub inwards (1) and rotate it clockwise to increase the
breaking force (2).
If the printer have problems pulling the labels (especially when using
a ribbon less than 50 mm/2 in wide), push the knob at the end of the
ribbon supply hub inwards (1) and rotate it counterclockwise to decrease
the breaking force (2).
1
2

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English