Intermec EasyCoder PD4 User Manual

Intermec EasyCoder PD4—User’s Guide 17
Chapter 3—Starting Up
Direct Mode
e Direct Mode is the normal idle mode, where all commands from
external ports are interpreted and normal control key actions are per
-
formed. During reception of data, this message is shown in the display:
In the Direct Mode, you can use the keys for the following purposes:
• Feed out one blank label or portion of continuous stock by pressing
the Feed key.
• Pause the Direct Mode by pressing the Pause key. When the Direct
Mode is paused, this message is displayed:
• Enter the Setup Mode by simultaneously pressing the Feed and Pause
keys (see Chapter 5).

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English