Intermec EasyCoder PD4 User Manual

6 Intermec EasyCoder PD4—User’s Guide
Chapter 2—Installation
Unpacking the Printer
Before you install the printer, examine the package for possible damage
or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during transpor
-
tation. Keep the packing materials in case you need to move or reship
the printer.
• Check the label on the printer’s rear plate, which gives the voltage, the
part number, and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included. As standard, the box con
-
tains:
- Intermec EasyCoder PD4 printer
- Power cord
- Parallel cable
- High edge guide
- Empty ribbon core
- Supporting software and product information on CD
- Quick Start Guide.
• Check that the power cord is appropriate for the local standard. e
printer works with 100 to 240 VAC, 50 to 60 Hz.
If the printer has been damaged in any way during transportation, com
-
plain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it immediately
to the distributor.

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English