Intermec EasyCoder PD4 User Manual

70 Intermec EasyCoder PD4—User’s Guide
Appendix A—Technical Data
Printing
Print Technique Direct ermal/ermal Transfer
Printhead Resolutions 8 dots/mm (203.2 dpi) or
11.81 dots/mm (300 dpi)
1
Print Speed (variable) 50.8 to 152.4 mm/sec. (2 to 6 in/sec.)
50.8 to 101.6 mm/sec. (2 to 4 in/sec.)
8 dots/mm
11.81 dots/mm
Print Width 25 to 104 mm (1 to 4.09 in)
25 to 106 mm (1 to 4.17 in)
8 dots/mm
11.81 dots/mm
Print Length (max) 1,270 mm (50 in)
558.8 mm (22 in)
8 dots/mm
11.81 dots/mm
Print Directions 4
Media
Media Width
25 to 118.0 mm (1 to 4.65 inches)
Media Roll Diameter
(max)
212 mm (8.35 inches)
Media Roll Core Diameter
38.1 to 76.2 mm (1.5 to 3 in)
Media ickness 60 µm to 250 µm (2.3 to 9.8 mils)
Transfer Ribbon
Material
Wax, hybrid, or resin
Winding Ink on either inside or outside
Ribbon Width 30 to 110 mm (1.18 to 4.33 in)
Ribbon Roll Diameter
(outer)
76 mm (2.99 in) equivalent to
450 m (1,471 ft) of ribbon
At ribbon thick
-
ness 8 µm
Inner Core Diameter
25.2 to 25.6 mm (1.00 inches)
Modes of Operation
Tear-Off (Straight-
through)
Yes
Peel-Off (Self-strip) Optional
Cut-Off Optional
Firmware
Operating System ESim v5.xx
Latin Fonts 5 resident alphanumeric fonts.
Windows bitmap fonts can be down
-
loaded.
Table of Technical Data

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English