Intermec EasyCoder PD4 User Manual

Intermec EasyCoder PD4—User’s Guide 41
Chapter 6—Options
3 Remove the U-shaped clip and attach the rewinder unit to the center
section using the four screws included in the kit.
4 Plug in the cable from the rewinder switch into the front one of the
two connectors in the center section.
5 Install the media as described in Chapter 4 “Media Load”, section
“Peel-off (Self-strip).”
Rewinder cable
Switch

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English