Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 87
Interleaved 2 of 5 Options
This section describes the Interleaved 2 of 5 options and contains
the programming bar codes you can use to configure those
options.
About Interleaved 2 of 5 Options
The Interleaved 2 of 5 symbology has the following
programmable features:
•Check Digit
• Label Length Format
•Read Verification
Set to One Read ---------
Set to Two Reads ---------
Set to Three Reads ---------
Set to Four Reads ---------
END------------------------------------
To Next Page
Loading...
Need help?
General
