Intermec SR61T2D User Manual

Chapter 3 — Configuring Label Transmit Settings
52 SR60 Scanner Programmer’s Reference Manual
Disabling a Global Prefix or Suffix
You can disable a global prefix or suffix.
To disable global prefix or suffix characters
1 Scan the SET bar code on this page.
2 Scan the Set Prefix or Set Suffix bar code.
3 Scan the 0 digit four times to disable the prefix or suffix
characters.
4 Scan the END bar code.
Set Suffix ---------
Use the ASCII table on page 164 to identify the ASCII character(s)
and the corresponding hex code(s) for the suffix. Then use the bar
codes on
page 160 to scan the four digits corresponding to the hex
values.
END------------------------------------
Disabling Global Prefix/Suffix Characters
SET-------------------------------------
Set Prefix ---------

Intermec SR61T2D Specifications

General

Brand	Intermec
Model	SR61T2D
Category	Barcode Reader
Language	English