Interroll DL Series

To Next Page

To Previous Page

Version 1.2 (08/2022) en

Translation of original operating instructions 15 of 64

Product information of DL series asynchronous 1-phase

Type plate (2) for DL series asynchronous 1-phase

Type plate (3) for DL series asynchronous 1-phase

Main Page

Table of Contents3
Information about the Manual6
Safety7
State of the Art7
Intended Use7
Unintended Use7
Personnel Qualification7
Dangers8
Interfaces to Other Devices9
General Technical Information10
Product Description10
Options10
Dimensions of DL Series Drum Motor10
Technical Data12
Product Identification12
Thermal Protection13
Product Information of DL Series Asynchronous 1-Phase Type Plate of DL Series Asynchronous 1-Phase14
Electrical Data for DL Series Asynchronous 1-Phase16
DL 0080 Asynchronous 1-Phase16
DL 0113 Asynchronous 1-Phase17
Connection Diagrams of DL Series Asynchronous 1-Phase17
Cable Connections17
Connections in the Terminal Box18
Product Information of DL Series Asynchronous 3-Phase Type Plate of DL Series Asynchronous 3-Phase19
Electrical Data for DL Series Asynchronous 3-Phase21
DL 0080 Asynchronous 3-Phase21
DL 0113 Asynchronous 3-Phase22
Connection Diagrams of DM Series Asynchronous 3-Phase23
Cable Connections23
Connections in the Terminal Box25
Options and Accessories26
Asynchronous Drum Motors with Frequency Inverters26
Torque Depends on Input Frequency26
Frequency Inverter Parameters26
Transport and Storage28
Transport28
Storage29
Assembly and Installation30
Warning Notices Concerning the Installation30
Installing the Drum Motor30
Positioning the Drum Motor30
Installing the Motor with Mounting Brackets31
Belt Assembly33
Belt Adjustment33
Tensioning the Belt34
Belt Tension35
Belt Elongation35
Measuring the Belt Elongation36
Calculating the Belt Elongation37
Drum Coating38
Sprockets38
Warning Notices Concerning the Electrical Installation38
Electrical Connection of the Drum Motor39
Connecting the Drum Motor - with a Cable39
Connecting the Drum Motor - with a Terminal Box39
Single-Phase Motor39
External Motor Protection39
Integrated Thermal Protection40
Frequency Inverter40
Initial Startup and Operation42
Initial Startup42
Checks before the Initial Startup42
Operation42
Checks before Every Startup43
Procedure in Case of Accident or Fault43
Maintenance and Cleaning44
Warning Notices Concerning Maintenance and Cleaning44
Preparation for Maintenance and Cleaning by Hand44
Maintenance44
10.3.1 Checking the Drum Motor44
10.3.2 Relubricating the Drum Motor44
10.3.3 Maintaining Drum Motors with Optional, Relubricating IP66 Seals45
Oil Change at Drum Motor45
Cleaning45
10.5.1 Cleaning the Drum Motor with Pressure Washer46
10.5.2 Hygienic Cleaning47
Troubleshooting48
Decommissioning and Disposal55
Shutdown55
Disposal55
Appendix56
List of Abbreviations56
Translation of the Original Declaration of Conformity (CE)59
Translation of the Original Declaration of Conformity (UKCA)60

Interroll DL Series - Page 15

Table of Contents