Interroll DL Series - Decommissioning and Disposal; Shutdown; Disposal

Version 1.2 (08/2022) en
Translation of original operating instructions 55 of 64
Decommissioning and disposal
12 Decommissioning and disposal
• When disposing the motor oil, observe the disposal documents of the motor manufacturer.
• The packaging must be recycled to provide environmental relief.
12.1 Shutdown
CAUTION
Risk of injury due to incorrect handling!
¾ Shut-downmayonlybeexecutedbyqualiedandauthorizedpersons.
¾ Onlyshutdownthedrummotorafterswitchingothepower.Ensurethatthedrummotorcannotbeturned
on accidentally.
1. Disconnect the motor cable from the power supply and motor control.
2. Remove tension on the belt.
3. Remove holding plate from the motor mount.
4. Remove the drum motor out of the conveyor frame.
12.2 Disposal
In principle, the operator is responsible for the professional and environmentally friendly disposal of the
products.
The implementation of the WEEE Directive 2012/19/EU in national laws must be observed.
Alternatively,Interrolloerstotakebacktheproducts.
Contact:
www.interroll.com
Whendisposingofthedrummotoranditspackaging,followlocalandindustry-specicregulations.