Interroll DL Series - Translation of the Original Declaration of Conformity (CE)

Version 1.2 (08/2022) en
Translation of original operating instructions 59 of 64
Appendix
13.2 Translation of the original Declaration of Conformity (CE)
EU Declaration of conformity
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Inadditiontotheinformationspeciedabove,themanufacturerdeclaresthat:
The health and safety requirements have been applied in accordance with Annex I (1.1.2, 1.1.3, 1.1.5, 1.2.6, 1.3.2,
1.3.4, 1.3.9, 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.6.1, 1.6.4, 1.7.2, 1.7.3, 1.7.4, 1.7.4.2). The
relevant technical documentation has been compiled in accordance with Annex VII B and has been passed on to the relevant
authorities where applicable.
The commissioning of the incomplete machine is prohibited until the conformity of the overall
machine/system in which it is installed with the EC Machinery Directive has been declared.
Authorised for compiling technical documentation:
Interroll Trommelmotoren GmbH, Opelstraße 3, D-41836 Hueckelhoven/Baal
Frank Ratanski
Head of CoE Service – Interroll Trommelmotoren GmbH
Hueckelhoven/Baal, 24.09.2022
Declaration of incorporation
EC Machinery Directive 2006/42/EC
The manufacturer
Interroll Trommelmotoren GmbH
Opelstraße 3
41836 Hueckelhoven/Baal
Germany
hereby declares that the "incomplete machine"
• Drum motor DL 0080; DL 0113
conforms to the applicable provisions and the associated CE marking in accordance with the
aforementioned Directives.
List of the coordinated standards that have been applied:
EN ISO 12100:2010
EN 60034-1:2010
EN 60204-1:2018
EN IEC 63000:2018