Version 1.2 (08/2022) en
Translation of original operating instructions 19 of 64
Product information of DL series asynchronous 3-phase
5 Product information of DL series asynchronous 3-phase
5.1 Type plate of DL series asynchronous 3-phase
The information on the nameplate of the drum motor is used to identify it. This is the only way for the drum motor to
be used properly.
DrummotorsoftheDLserieshavedierentkindsofnameplates:
1. Round nameplate (1) on the end housing of the drum motor (glued or laser-engraved)
2. Rectangular nameplate (2) on the terminal box (if available, glued or laser-engraved)
3. Rectangular nameplate (3) included with the motor
Type plate (1) for DL series asynchronous 3-phase
To Next Page