Interroll DL Series - Translation of the Original Declaration of Conformity (UKCA)

60 of 64
Version 1.2 (08/2022) en
Translation of original operating instructions
Appendix
13.3 Translation of the original Declaration of Conformity (UKCA)
Declaration of conformity
UK Electromagnetic Compatibility Regulations 2016
UKRestrictionoftheUseofCertainHazardousSubstancesin
Electrical and Electronic Equipment Regulations 2012
Declaration of incorporation
UK Supply of Machinery (Safety) Regulations 2008
The manufacturer
Interroll Trommelmotoren GmbH
Opelstraße 3
41836 Hueckelhoven/Baal
Germany
represented in the UK by Interroll Limited
Unit 1a, Orion Way, Kettering, Northants
NN15 6NL
England
hereby declares that the "incomplete machine"
• Drum motor DL 0080; DL 0113
conforms to the applicable provisions and the associated UKCA marking in accordance with the
aforementioned Directives.
Inadditiontotheinformationspeciedabove,themanufacturerdeclaresthat:
The health and safety requirements have been applied in accordance with the EC Machinery Directive 2006/42/EC as listed
in the EC Declaration of incorporation. The relevant technical documentation has been compiled in accordance with Annex
VII B and has been passed on to the relevant authorities where applicable.
The commissioning of the incomplete machine is prohibited until the conformity of the overall
machine/system in which it is installed with the UK Supply of Machinery (Safety) Regulations 2008
has been declared.
Authorised for compiling technical documentation:
Interroll Trommelmotoren GmbH, Opelstraße 3, D-41836 Hueckelhoven/Baal
Frank Ratanski
Head of CoE Service – Interroll Trommelmotoren GmbH
Hueckelhoven/Baal, 24.09.2022