Interroll DL Series - Checks before Every Startup; Procedure in Case of Accident or Fault

Version 1.2 (08/2022) en
Translation of original operating instructions 43 of 64
Initial startup and operation
NOTICE
Damage of drum motor in reversing operation!
¾ Ensure that a time delay is in place between forward and reversing movement. Before reversing, the motor
must come to a complete standstill.
9.2.1 Checks before every startup
1. Check the drum motor for visible damage.
2. Ensure that no contact points exist between objects, conveyor belts and rotating or moving parts.
3. Ensure that the drum motor and the conveyor belt can move freely.
4. Check all safety devices.
5. Ensure that no bystanders are in dangerous areas around the conveyor.
6. Clearly specify and monitor the way materials are placed on the conveyor.
9.3 Procedure in case of accident or fault
1. Stop the drum motor at once and ensure that it cannot be started accidentally.
2. Incaseofanaccident:Providerstaidandmakeanemergencycall.
3. Inform the responsible person.
4. Havethemalfunctionrepairedbyqualiedpersons.
5. Startthedrummotoronlyafterthishasbeenapprovedbyqualiedpersons.