User’s Manual of netMod Network Termination Unit
6. Calling Line Identification Restriction (CLIR)
Calling Line Identification Restriction is a service offered to the calling subscriber to restrict
the presentation of his/her calling party’s number to the called subscribers. The following
keys combinations are valid, only when the user is a subscriber of the CLIR service in a
call-by-call basis.
• Restrict the presentation of calling party’s number when pressing *31#
• Allow the presentation of calling party’s number when pressing
#31#
• Restrict the presentation on a call by call basis when pressing:
*31*CalledParty’sNumber
Note that this service is initially deactivated on both analogue
ports of netMod.
7. Connected Line Restriction (COLR)
This service is offered to the called subscriber, to restrict presentation of his/her party’s
number during the connection of the call.
• Activate the restriction by pressing *77#
• Deactivate the restriction by pressing
#77#
Note that this service is initially deactivated on both analogue
ports of netMod.
8. Malicious Call Identification (MCID)
The Malicious Call Identification service allows the called subscriber to ask the Operator
about the identification of the calling party number, provided that the calling subscriber has
the CLIR service activated. The information is given in a printed form, by the local
exchange of the called subscriber.
The malicious call identification can be activated during the call, by pressing
FLASH*39#.
26
To Next Page
Loading...
